Main Description of The Product: 1. 24 ports patch panel, Cat.6 UTP type. The structure of each port of this patch panel is same and unalded. That structure makes sure that the performance of each port is consisitent. 2. The cable manager is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel. 3. According to ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568B.2-1 Cat.6 standard. T568A punching sequence and T568B punching sequence are both compatible. Fitting for horizontal distribution in the equipments room and equipments connecting. 4. Connecting: FCC port for Cat.6 UTP patch cord and IDC for horizontal distribution calbes. 5. Compatibility: Compatible for UTP Cat.6 or Cat.5e,Cat.5 general cable distribution systems.
Cat5E & Cat6
PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U"/0.0762um to 50 U"/1.27um Gold plating on contact area
Krone /Dual IDC
19 inch, 1U & 2U
PC UL94V-0, Accept 22-26 AWG Solid Wire
ISO/IEC 11801 and EIA/TIA-568Bstandards
1 pcs/box, 20 pcs/carton, carton size: 52 X 26 X 50cm
T/T & Western Union
When building structured cabling systems, patch panels are used in racks and telecommunication cabinets for cable mounting in order to provide a high-quality commutation. A separate patch panel port is designated for each line. A patch panel is a block of jacks, the number of which corresponds to that of ports. E.g., a block of 24 jacks is a 24-port panel.
Numerical markings are put on the ports at the front of the panel. At the back of the panel contacts contain colour and numerical markings. There are areas for additional marking.
Patch panels differ in the number of ports, category and mounting technique.
By the number of ports, 12-, 24- and 48-port patch panels are most widely spread.
By the standards, category 5e and 6 patch panels are mostly used.
The main commutation mean is patch cords (a sections of cable, usually up to 5 m long, of the appropriate category with plug-type connections at the ends). They are used to connect patch panel ports, active equipment, sockets at the working places (PC, telephones, printers, etc).
The cable is laid to each port and using a special tool is mounted (connected to) in the IDC module (IDC is Insulation Displacement Connection). There are the following types of IDC modules: of type 110 , Krone and Dual IDC (universal). Depending on the module type different tools are used for cable mounting. Dual IDC is a universal module and admits use both 110 type tool and Krone type tool for cable mounting.
Panels may be mounted on the wall and in 19" telecommunication cabinets, racks and frames. Some kinds of panels are produced according to standard 10".
Panels mounted on the wall may be on a support (with rear mounting) and with front mounting .
Panels on the support are taken off from the support when mounting the cables, and then they are locked back. Besides, they may be mounted on 19" frames for crosses of type 66, due to the same type of supports used.
Panel with front mounting are fixed directly to the walls. They are more compact, may be mounted directly to the box. The size of 24-port panels with front mounting is 19", which allows their use in racks.
Wall-mounted patch panel with front mounting
According to the type of ports there are telephone and computer patch panel. Telephone panels have ports of type RJ-12 (6p4c, 6p6c) and are used for commutation of telephone lines. To make commutation with telephone stations simple, some telephone patch panels are provided with ports of type Telco (25 pairs).
Computer patch panels have RJ45 (8p8c) ports and are most often used in computer networks. Depending on the requirements to data transmission lines in computer networks patch panels with RJ-45 ports may be of category 5e and category 6 . Patch panels with shielded ports are used in structured cable systems with shielded communication circuits.
Module panels are a separate type of patch panels. These are panels with cells for module of a special format. As module both RJ12 and RJ45, and BNC may be used even for the optical cable, module panels permit to create almost any port configuration needed for task solving.
Technique Characteristics: 1. Entire high-carbon steel outer frame, with plastic powder cladding. 2. RJ45 jack frame material: PBT, golden clad phosphor bronze pins; Shielding shell of the RJ45 jack; Brass housing with nickel plate; IDC clip: Tinned phosphor bronze pins. 3. Fitting for 22AWG/23AWG/24AWG cables, Punching dependability: 750 times. 4. Cabling sequence: T568A & B 5. Punching tools: standard dual use IDC punching tools. 6. Testing condition of transmitting capability: 250MHz.
Qty: 1pcs/bag,2pcs/box 10pcs/CTN
Our company was founded in SHENZHEN in year 2005. SELECTECH invested factory which named New-Epoch Communication industry Co.,LTD focuses on the production and R&D of network products for standard CAT5E & CAT6, and computer peripherals ,communication accessories such network wall plate and keystone jack and patch panel ect. USA and European telephone adaptor and plug and jack accessories and various cable included telephone cable,wire ect..Of cource,we have more products,you're welcom to vist our website to know more.We can supply custom and OEM/ODM service as per your request.
Please note our all telephone accessories is ROHS approval material. And we export big qty for the products in every month. I'm sure our over 10 years production and export experiences will satisified with you. We also hope to do more cooperation with you!
You are welcome to contact us for more information !